Noob or Inactive Spam Script for NEAT Bot – by EHU

Wednesday, December 10, 2014Tuesday, September 29, 2015 Evony Hookups

NEAT Bot Note

If you are not familar with NEAT Bot for Evony then head over to the NEAT Bot section of Evony Hookups to learn a bit more about and acquire the BEST Evony Bot yet!

Set the coordinates, change “MainHero” or “SpamHero” variables if needed, adjust “MainArmy” and “SpamArmy” variables to your liking.. then let’r rip!

Script waits a bit to let recalled heroes come home, then attacks with the MainArmy, sends 8 smaller SpamArmy waves, then repeats! It couldn’t get any more simple.. (aside from using “Capture” or “LoyaltyAttack” commands, but those have catches that will stop – this script only stops when out of troops!) 😉

This Noob/Inactive Spam Script is crude, but definitely does the trick! You can edit it to suit many needs.. 🙂

EHU Script/Goal Note

Scripts and Goals by Evony Hookups are updated as frequently as possible when there are outdated lines that need to be updated, or upgrades to how the Script/Goal works, however, they can’t always be tested with each update – there are simply too many. There may be small errors in operation or typos due to an update. Please keep this in mind when using Scripts or Goals by EHU and report any errors or suggestions in the comments below or via email on the Contact page!

Noob or Inactive Spam Script for NEAT Bot – by EHU:

//----    Evony Hookups    ----// 
//----    Noob or Inactive Spam Script for NEAT Bot - by EHU    ----//
//----    Last Edited: 12/09/2014    ----//

//----   This is a simple spam script that spams
//----   the target coordinates with a decent
//----   hero and attack, then 8 waves of lesser 
//----   attacks with lesser heroes, and then 
//----   repeats until stopped or out of troops..

//----   Main User-Defined Variables - Change These!!   ----//
Target="xxx,yyy"   //-- City To Spam --//
MainHero="any:att>=200,att<best"   //-- Main Hero String --//
SpamHero="any:att<best,pol<best,int<best"   //-- Spam Hero String --//
MainArmy="c:50k,s:10k"   //-- Main Attack --//
SpamArmy="c:5k"   //-- Spam Attack Loop --//

//----   Nothing to edit below here!!!   ----// 
//------Start     of     actual     Sript------
//------ Start    of    actual    Sript  ------
//------  Start   of   actual   Sript    ------
//------   Start  of  actual  Sript      ------
//------    Start of actual Sript        ------
//------        Do Not Touch!!           ----//

echo "Running Noob or Inactive Spam Script.."

//----    Main Setup..
label Main
config wartown:1
recallall
sleep 480

//----    Main Loop..
Label MainLoop
execute "attack {Target} {MainHero} {MainArmy}"
Label Spam
getspamhero
execute "attack {Target} {SpamHero} {SpamArmy}"
repeat 8
Goto MainLoop

//
//----    www.EvonyHookups.info    ----//

//---- Evony Hookups ----//

//---- Noob or Inactive Spam Script for NEAT Bot - by EHU ----//

//---- Last Edited: 12/09/2014 ----//

//---- This is a simple spam script that spams

//---- the target coordinates with a decent

//---- hero and attack, then 8 waves of lesser

//---- attacks with lesser heroes, and then

//---- repeats until stopped or out of troops..

//---- Main User-Defined Variables - Change These!! ----//

Target="xxx,yyy" //-- City To Spam --//

MainHero="any:att>=200,att<best" //-- Main Hero String --//

SpamHero="any:att<best,pol<best,int<best" //-- Spam Hero String --//

MainArmy="c:50k,s:10k" //-- Main Attack --//

SpamArmy="c:5k" //-- Spam Attack Loop --//

//---- Nothing to edit below here!!! ----//

//------Start of actual Sript------

//------ Start of actual Sript ------

//------ Do Not Touch!! ----//

echo "Running Noob or Inactive Spam Script.."

//---- Main Setup..

label Main

config wartown:1

recallall

sleep 480

//---- Main Loop..

Label MainLoop

execute "attack {Target} {MainHero} {MainArmy}"

Label Spam

getspamhero

execute "attack {Target} {SpamHero} {SpamArmy}"

repeat 8

Goto MainLoop

//---- www.EvonyHookups.info ----//

Hero Finder Script for NEAT Bot – by Sericom

Wednesday, October 22, 2014Tuesday, September 29, 2015 Evony Hookups

NEAT Bot Note

If you are not familar with NEAT Bot for Evony then head over to the NEAT Bot section of Evony Hookups to learn a bit more about and acquire the BEST Evony Bot yet!

Here’s two nice scripts to help you find good heroes in the inn to hire…

This will find the number of heroes with base that you specify. Make sure any current heroes in the city are not marching or will be sent out while script is running, or there’s a slim chance that they could be fired. You tell it how many of each type of hero you want it to find, not the total amount you want to end up with (It’s currently set to get you 4 more attack heroes and 1 pol hero). Script will reset your goals when ran, and will load goals in position 0 when finished. Be careful if you plan to fill the feasting hall and you have a travelling training hero, the bot may fire one of your heroes. Good for those new cities.

Find bad ass new heroes from the inns with style using this Age 1 NEAT Bot Hero Finder script by Sericom

Version 1 – Hero Finder Script for NEAT Bot – by Sericom:

//----    Evony Hookups    ----// 
//----    Version 1 - Hero Finder Script for NEAT Bot - by Sericom    ----//

//------------------------Hero Finder------------------------//
//This will find the number of heroes with base that you
//specify. Make sure any current heroes in the city are
//not marching or will be sent out while script is running,
//or there's a slim chance that they could be fired.
//You tell it how many of each type of hero you want it to
//find, not the total amount you want to end up with (It's
//currently set to get you 4 more attack heroes and 1 pol hero).
//Script will reset your goals when ran, and will load goals
//in position 0 when finished.
//Be careful if you plan to fill the feasting hall and you have
//a travelling training hero, the bot may fire one of your heroes.
//-----------------------------------------------------------//

MIN_BASE = 65
ATTACK_HEROES = 4
INTEL_HEROES = 0
POL_HEROES = 1

//---------------nothing to alter below here-----------------//
resetgoals
config nomayor:1
startHeroCount = city.heroes.length
currHeroCount = startHeroCount
if startHeroCount = 0 goto getNext
currentNames = []
tempNames = [ "aa", "bb", "cc", "dd", "ee", "ff", "gg", "hh", "ii" ]
i = 0
label renameNext
currentNames = currentNames.concat(city.heroes[i].name)
execute "renamehero " + currentNames[i] + " " + tempNames[i]
i = i + 1
if i < startHeroCount goto renameNext

label getNext
if city.innHeroes.length < 1 goto getNext
getspamhero
setfocus
label retry
if city.heroes.length = currHeroCount goto retry
if ((city.heroes[currHeroCount].base >= MIN_BASE ) * (ATTACK_HEROES > 0) * (city.heroes[currHeroCount].typeName="Att")) + ((city.heroes[currHeroCount].base >= MIN_BASE) * (POL_HEROES > 0) * (city.heroes[currHeroCount].typeName="Pol")) + ((city.heroes[currHeroCount].base >= MIN_BASE) * (INTEL_HEROES > 0) * (city.heroes[currHeroCount].typeName="Int")) goto gotOne
execute "firehero " + city.heroes[currHeroCount].name
label retry2
if city.heroes.length = currHeroCount goto getNext
goto retry2

label gotOne
if (city.heroes[currHeroCount].typeName="Att") ATTACK_HEROES = ATTACK_HEROES - 1
if (city.heroes[currHeroCount].typeName="Int") INTEL_HEROES = INTEL_HEROES - 1
if (city.heroes[currHeroCount].typeName="Pol") POL_HEROES = POL_HEROES - 1
currHeroCount = currHeroCount + 1
if (ATTACK_HEROES = 0) * (INTEL_HEROES = 0) * (POL_HEROES = 0) goto setOriginalHeroNames
goto getNext

label setOriginalHeroNames
if startHeroCount = 0 goto allDone
j = 0
label renameNext2
execute "renamehero " + tempNames[j] + " " + currentNames[j]
j = j + 1
if j < startHeroCount goto renameNext2
label allDone
echo "All Done"
config nomayor:0
loadgoals 0

//
//----    www.EvonyHookups.info    ----//

//---- Evony Hookups ----//

//---- Version 1 - Hero Finder Script for NEAT Bot - by Sericom ----//

//------------------------Hero Finder------------------------//

//This will find the number of heroes with base that you

//specify. Make sure any current heroes in the city are

//not marching or will be sent out while script is running,

//or there's a slim chance that they could be fired.

//You tell it how many of each type of hero you want it to

//find, not the total amount you want to end up with (It's

//currently set to get you 4 more attack heroes and 1 pol hero).

//Script will reset your goals when ran, and will load goals

//in position 0 when finished.

//Be careful if you plan to fill the feasting hall and you have

//a travelling training hero, the bot may fire one of your heroes.

//-----------------------------------------------------------//

MIN_BASE = 65

ATTACK_HEROES = 4

INTEL_HEROES = 0

POL_HEROES = 1

//---------------nothing to alter below here-----------------//

resetgoals

config nomayor:1

startHeroCount = city.heroes.length

currHeroCount = startHeroCount

if startHeroCount = 0 goto getNext

currentNames = []

tempNames = [ "aa", "bb", "cc", "dd", "ee", "ff", "gg", "hh", "ii" ]

i = 0

label renameNext

currentNames = currentNames.concat(city.heroes[i].name)

execute "renamehero " + currentNames[i] + " " + tempNames[i]

i = i + 1

if i < startHeroCount goto renameNext

label getNext

if city.innHeroes.length < 1 goto getNext

getspamhero

setfocus

label retry

if city.heroes.length = currHeroCount goto retry

if ((city.heroes[currHeroCount].base >= MIN_BASE ) * (ATTACK_HEROES > 0) * (city.heroes[currHeroCount].typeName="Att")) + ((city.heroes[currHeroCount].base >= MIN_BASE) * (POL_HEROES > 0) * (city.heroes[currHeroCount].typeName="Pol")) + ((city.heroes[currHeroCount].base >= MIN_BASE) * (INTEL_HEROES > 0) * (city.heroes[currHeroCount].typeName="Int")) goto gotOne

execute "firehero " + city.heroes[currHeroCount].name

label retry2

if city.heroes.length = currHeroCount goto getNext

goto retry2

label gotOne

if (city.heroes[currHeroCount].typeName="Att") ATTACK_HEROES = ATTACK_HEROES - 1

if (city.heroes[currHeroCount].typeName="Int") INTEL_HEROES = INTEL_HEROES - 1

if (city.heroes[currHeroCount].typeName="Pol") POL_HEROES = POL_HEROES - 1

currHeroCount = currHeroCount + 1

if (ATTACK_HEROES = 0) * (INTEL_HEROES = 0) * (POL_HEROES = 0) goto setOriginalHeroNames

goto getNext

label setOriginalHeroNames

if startHeroCount = 0 goto allDone

j = 0

label renameNext2

execute "renamehero " + tempNames[j] + " " + currentNames[j]

j = j + 1

if j < startHeroCount goto renameNext2

label allDone

echo "All Done"

config nomayor:0

loadgoals 0

//---- www.EvonyHookups.info ----//

Version 2 – Hero Finder Script for NEAT Bot – by Sericom:

The following variation uses the true base (what it will be after you water hero). Heroes get renamed with the true base tacked on the end.

Note: This will currently only work with level 1 Inns.

//----    Evony Hookups    ----// 
//----    Version 2 (lvl 1 inn) - Hero Finder Script for NEAT Bot - by Sericom    ----//

MIN_BASE = 50
ATTACK_HEROES = 6
INTEL_HEROES = 0
POL_HEROES = 1

//---------------nothing to alter below here-----------------//
resetgoals
config nomayor:1
startHeroCount = city.heroes.length
currHeroCount = startHeroCount
if startHeroCount = 0 goto getNext
currentNames = []
tempNames = [ "aa", "bb", "cc", "dd", "ee", "ff", "gg", "hh", "ii" ]
i = 0
label renameNext
currentNames = currentNames.concat(city.heroes[i].name)
execute "renamehero " + currentNames[i] + " " + tempNames[i]
i = i + 1
if i < startHeroCount goto renameNext
label getNext
label recheck
setfocus
sleep 2
if city.innHeroes.length < 1 goto recheck
trueBase = max(city.innHeroes[0].power,city.innHeroes[0].stratagem,city.innHeroes[0].management) - city.innHeroes[0].heroWithBaseToString.split(">")[4].split(max(city.innHeroes[0].power,city.innHeroes[0].stratagem,city.innHeroes[0].management))[1].replace("]","").split("-")[1].split(" ")[0]*1
getspamhero
setfocus
label retry
if city.heroes.length = currHeroCount goto retry
if ((trueBase >= MIN_BASE ) * (ATTACK_HEROES > 0) * (city.heroes[currHeroCount].typeName="Att")) + ((trueBase >= MIN_BASE) * (POL_HEROES > 0) * (city.heroes[currHeroCount].typeName="Pol")) + ((trueBase >= MIN_BASE) * (INTEL_HEROES > 0) * (city.heroes[currHeroCount].typeName="Int")) goto gotOne
execute "firehero " + city.heroes[currHeroCount].name
label retry2
if city.heroes.length = currHeroCount goto getNext
goto retry2

label gotOne
if (city.heroes[currHeroCount].typeName="Att") ATTACK_HEROES = ATTACK_HEROES - 1
if (city.heroes[currHeroCount].typeName="Int") INTEL_HEROES = INTEL_HEROES - 1
if (city.heroes[currHeroCount].typeName="Pol") POL_HEROES = POL_HEROES - 1
execute "renamehero " + city.heroes[currHeroCount].name + " Base" + trueBase
currHeroCount = currHeroCount + 1
if (ATTACK_HEROES = 0) * (INTEL_HEROES = 0) * (POL_HEROES = 0) goto setOriginalHeroNames
goto getNext

label setOriginalHeroNames
if startHeroCount = 0 goto allDone
j = 0
label renameNext2
execute "renamehero " + tempNames[j] + " " + currentNames[j]
j = j + 1
if j < startHeroCount goto renameNext2
label allDone
echo "All Done"
config nomayor:0
loadgoals 0

//
//----    www.EvonyHookups.info    ----//

//---- Evony Hookups ----//

//---- Version 2 (lvl 1 inn) - Hero Finder Script for NEAT Bot - by Sericom ----//

MIN_BASE = 50

ATTACK_HEROES = 6

INTEL_HEROES = 0

POL_HEROES = 1

//---------------nothing to alter below here-----------------//

resetgoals

config nomayor:1

startHeroCount = city.heroes.length

currHeroCount = startHeroCount

if startHeroCount = 0 goto getNext

currentNames = []

tempNames = [ "aa", "bb", "cc", "dd", "ee", "ff", "gg", "hh", "ii" ]

i = 0

label renameNext

currentNames = currentNames.concat(city.heroes[i].name)

execute "renamehero " + currentNames[i] + " " + tempNames[i]

i = i + 1

if i < startHeroCount goto renameNext

label getNext

label recheck

setfocus

sleep 2

if city.innHeroes.length < 1 goto recheck

trueBase = max(city.innHeroes[0].power,city.innHeroes[0].stratagem,city.innHeroes[0].management) - city.innHeroes[0].heroWithBaseToString.split(">")[4].split(max(city.innHeroes[0].power,city.innHeroes[0].stratagem,city.innHeroes[0].management))[1].replace("]","").split("-")[1].split(" ")[0]*1

getspamhero

setfocus

label retry

if city.heroes.length = currHeroCount goto retry

if ((trueBase >= MIN_BASE ) * (ATTACK_HEROES > 0) * (city.heroes[currHeroCount].typeName="Att")) + ((trueBase >= MIN_BASE) * (POL_HEROES > 0) * (city.heroes[currHeroCount].typeName="Pol")) + ((trueBase >= MIN_BASE) * (INTEL_HEROES > 0) * (city.heroes[currHeroCount].typeName="Int")) goto gotOne

execute "firehero " + city.heroes[currHeroCount].name

label retry2

if city.heroes.length = currHeroCount goto getNext

goto retry2

label gotOne

if (city.heroes[currHeroCount].typeName="Att") ATTACK_HEROES = ATTACK_HEROES - 1

if (city.heroes[currHeroCount].typeName="Int") INTEL_HEROES = INTEL_HEROES - 1

if (city.heroes[currHeroCount].typeName="Pol") POL_HEROES = POL_HEROES - 1

execute "renamehero " + city.heroes[currHeroCount].name + " Base" + trueBase

currHeroCount = currHeroCount + 1

if (ATTACK_HEROES = 0) * (INTEL_HEROES = 0) * (POL_HEROES = 0) goto setOriginalHeroNames

goto getNext

label setOriginalHeroNames

if startHeroCount = 0 goto allDone

j = 0

label renameNext2

execute "renamehero " + tempNames[j] + " " + currentNames[j]

j = j + 1

if j < startHeroCount goto renameNext2

label allDone

echo "All Done"

config nomayor:0

loadgoals 0

//---- www.EvonyHookups.info ----//

Source: Sericom

Find Player in Peace Mode within Radius Script for NEAT Bot – by sgkdnay

Wednesday, October 22, 2014Tuesday, September 29, 2015 Evony Hookups

NEAT Bot Note

If you are not familar with NEAT Bot for Evony then head over to the NEAT Bot section of Evony Hookups to learn a bit more about and acquire the BEST Evony Bot yet!

Some times looking at the map with a pen and paper can be a bit daunting, not to mention sooo 2009..

Here is a great script for finding and/or scouting enemies… Inspired by SRG’s Script and revised to compressed script. It will find an player around you, not in truce, but peace mode only and ignore alliance of your own and list others. *REVISION, alot of changes and fixes*

Scout after scanning/search to match your criteria

Include/Exclude Reds

Include/Exclude Neutral

Will Ignore Self/Alliance

Set up radius you want to scan

Will Scout if you opt’d to after scan

You can set up how many rally spot can be used up at a time

Will keep sending scout until rally is full and try again in 30s (repeat/rinse)

Pre-Script made easy to copy/paste for attack if you find the city you want to attack “ie: 0 Loy” after scouting (if opt’d)

Can set up your own amount of scout to use to scout folks.

Find Players in Peace Mode to attack with ease using this NEAT Bot script by sgkdnay

Find Player in Peace Mode within Radius Script for NEAT Bot – by sgkdnay:

//----    Evony Hookups    ----// 
//----    Find Player in Peace Mode within Radius Script for NEAT Bot - by sgkdnay    ----//

//Change this ONLY!
//It will search/scout (if selected) all cities excluding yourself and your alliance...
set rad 5 //set miles radius
set IncRed 0 //Include Reds in Search? (0-no/1-yes)
set IncNeu 0 //Include Neutrals in Search? (0-no/1-yes)

//Scouting
set sco 0 //send scout after finding? (0-no/1-yes)
set scotroop 10k //how many scout to send at a time
set RallyUse 10 //how many rally spot to use at a time for scout

//Do Not Modify Below! Unless you know what you're doing :P
label StartHere
echo "Search for Victims - Automated Scan/Scout Script - by SRG/Vandiel v1.3"
echo "Initializing Settings..."
gosub Settings //get Preset settings
echo "Scanning the map, please wait..."
execute "scanmap " + city.coords + " " + %rad%
PV = FindField(city.x, city.y, %rad%, 11, 0).sort(city.compareByDistanceToCastle)
if(PV.length = 0) echo "No City found within " + %rad% + " mile(s).. Increase your radius!"
if(PV.length = 0) end
echo "We found potentially " + PV.length + " city(s)/" + %rad% + " miles..."
echo "It will take a bit... go and twiddle your thumb..."
echo "Preset Attack Script, change to suit your needs..."
echo "Copy/paste the result list and remember to remove the timestamp"
echo "set S attack //change to scout if scouting"
echo "set T c:5k //change to s:10k (or however number you want) if scouting"
echo "set H !notthishero,butthishero //change to your hero name"
echo "======= VICTIM(s) ============"
echo "XXX,YYY : <Alliance> Player (Castle) {Mile}"

label LoopVics
fD = GetDetailInfo(PV[i],true)
ifgoto(fD == null) LoopVics
ifgosub(fD.state == 1) GotOne
i = i + 1
ifgoto i < PV.length LoopVics
goto END

label GotOne
if(RelationIndex(fD) == 0) gosubreturn //Self
if(RelationIndex(fD) == 2) gosubreturn //Our Alliance
if(RelationIndex(fD) == 1) if(%IncRed% == 0) gosubreturn //Reds
if(RelationIndex(fD) == 4) if(%IncNeu% == 0) gosubreturn //Neutrals
FO = FO + 1
echo "%S% " + FieldIdToCoords(PV[i])+" %H% %T% //: <"+fD.allianceName+"> "+fD.userName+" ("+fD.name+") "+"{"+round(MapDistance(city.x,city.y,GetX(PV[i]),GetY(PV[i])),2)+"}"
if(%sco% == 1) PVNewC = PVNewC.concat(FieldIdToCoords(PV[i]))
if(%sco% == 1) PVNewN = PVNewN.concat(fD.userName)
if(%sco% == 1) PVNewT = PVNewT.concat(fD.name)
gosubreturn

label Settings
ifgoto(%RallyUse% > city.getBuildingLevel(29)) ExcRally
FO = 0
i = 0
if(%sco% == 1) CArr = 0
if(%sco% == 1) PVNewC = []
if(%sco% == 1) PVNewN = []
if(%sco% == 1) PVNewT = []
gosubreturn

label END
echo "======= END: "+FO+" VICTIM(s) ===="
if(FO == 0) echo "No City found within " + %rad% + " miles.. Increase your radius!"
if(FO == 0) end
if(%sco% == 0) echo "You request no scouting... Exit Gracefully..."
if(%sco% == 0) end
ifgoto(%sco% == 1) ScoutThis

label ScoutThis
echo "======= SENDING SCOUT(s) ====="
label ScoutCoord
ifgosub(%RallyUse% == city.selfArmies.length) WaitForIt
ifgosub(%ScoTroop% > city.troop.scouter) OutOfScout
echo "Scouting: " + PVNewC[CArr] + " - " + PVNewN[CArr] + " (" + PVNewT[CArr] + ")"
execute "scout " + PVNewC[CArr] + " none s:" + %scotroop%
CArr = CArr + 1
ifgoto(CArr < PVNewC.length) ScoutCoord
echo "======= DONE SCOUTed ========="
end

label WaitForIt
echo "No Rally Spot Available... Will try again in 30s..."
sleep 00:00:30
ifgoto(%RallyUse% == city.selfArmies.length) WaitForIt
gosubreturn

label OutOfScout
echo "Out of Scout!! Will try again in 30s when other scout returns..."
sleep 00:00:30
gosubreturn

label ExcRally
echo "You only have L" + city.getBuildingLevel(29) + " Rally.  Revise your Rally Use!"
echo "Exit gracefully..."
end

//
//----    www.EvonyHookups.info    ----//

100

101

102

//---- Evony Hookups ----//

//---- Find Player in Peace Mode within Radius Script for NEAT Bot - by sgkdnay ----//

//Change this ONLY!

//It will search/scout (if selected) all cities excluding yourself and your alliance...

set rad 5 //set miles radius

set IncRed 0 //Include Reds in Search? (0-no/1-yes)

set IncNeu 0 //Include Neutrals in Search? (0-no/1-yes)

//Scouting

set sco 0 //send scout after finding? (0-no/1-yes)

set scotroop 10k //how many scout to send at a time

set RallyUse 10 //how many rally spot to use at a time for scout

//Do Not Modify Below! Unless you know what you're doing :P

label StartHere

echo "Search for Victims - Automated Scan/Scout Script - by SRG/Vandiel v1.3"

echo "Initializing Settings..."

gosub Settings //get Preset settings

echo "Scanning the map, please wait..."

execute "scanmap " + city.coords + " " + %rad%

PV = FindField(city.x, city.y, %rad%, 11, 0).sort(city.compareByDistanceToCastle)

if(PV.length = 0) echo "No City found within " + %rad% + " mile(s).. Increase your radius!"

if(PV.length = 0) end

echo "We found potentially " + PV.length + " city(s)/" + %rad% + " miles..."

echo "It will take a bit... go and twiddle your thumb..."

echo "Preset Attack Script, change to suit your needs..."

echo "Copy/paste the result list and remember to remove the timestamp"

echo "set S attack //change to scout if scouting"

echo "set T c:5k //change to s:10k (or however number you want) if scouting"

echo "set H !notthishero,butthishero //change to your hero name"

echo "======= VICTIM(s) ============"

echo "XXX,YYY : <Alliance> Player (Castle) {Mile}"

label LoopVics

fD = GetDetailInfo(PV[i],true)

ifgoto(fD == null) LoopVics

ifgosub(fD.state == 1) GotOne

i = i + 1

ifgoto i < PV.length LoopVics

goto END

label GotOne

if(RelationIndex(fD) == 0) gosubreturn //Self

if(RelationIndex(fD) == 2) gosubreturn //Our Alliance

if(RelationIndex(fD) == 1) if(%IncRed% == 0) gosubreturn //Reds

if(RelationIndex(fD) == 4) if(%IncNeu% == 0) gosubreturn //Neutrals

FO = FO + 1

echo "%S% " + FieldIdToCoords(PV[i])+" %H% %T% //: <"+fD.allianceName+"> "+fD.userName+" ("+fD.name+") "+"{"+round(MapDistance(city.x,city.y,GetX(PV[i]),GetY(PV[i])),2)+"}"

if(%sco% == 1) PVNewC = PVNewC.concat(FieldIdToCoords(PV[i]))

if(%sco% == 1) PVNewN = PVNewN.concat(fD.userName)

if(%sco% == 1) PVNewT = PVNewT.concat(fD.name)

gosubreturn

label Settings

ifgoto(%RallyUse% > city.getBuildingLevel(29)) ExcRally

FO = 0

i = 0

if(%sco% == 1) CArr = 0

if(%sco% == 1) PVNewC = []

if(%sco% == 1) PVNewN = []

if(%sco% == 1) PVNewT = []

gosubreturn

label END

echo "======= END: "+FO+" VICTIM(s) ===="

if(FO == 0) echo "No City found within " + %rad% + " miles.. Increase your radius!"

if(FO == 0) end

if(%sco% == 0) echo "You request no scouting... Exit Gracefully..."

if(%sco% == 0) end

ifgoto(%sco% == 1) ScoutThis

label ScoutThis

echo "======= SENDING SCOUT(s) ====="

label ScoutCoord

ifgosub(%RallyUse% == city.selfArmies.length) WaitForIt

ifgosub(%ScoTroop% > city.troop.scouter) OutOfScout

echo "Scouting: " + PVNewC[CArr] + " - " + PVNewN[CArr] + " (" + PVNewT[CArr] + ")"

execute "scout " + PVNewC[CArr] + " none s:" + %scotroop%

CArr = CArr + 1

ifgoto(CArr < PVNewC.length) ScoutCoord

echo "======= DONE SCOUTed ========="

end

label WaitForIt

echo "No Rally Spot Available... Will try again in 30s..."

sleep 00:00:30

ifgoto(%RallyUse% == city.selfArmies.length) WaitForIt

gosubreturn

label OutOfScout

echo "Out of Scout!! Will try again in 30s when other scout returns..."

sleep 00:00:30

gosubreturn

label ExcRally

echo "You only have L" + city.getBuildingLevel(29) + " Rally. Revise your Rally Use!"

echo "Exit gracefully..."

end

//---- www.EvonyHookups.info ----//

Find Player in Peace Mode within Radius Script for NEAT Bot – by sgkdnay
OUTPUT:

14:32:45 Search for Victims – Automated Scan/Scout Script – by SRG/Vandiel v1.2
14:32:46 Initializing Settings…
14:32:56 Scanning the map, please wait…
14:32:57 SCAN COMPLETED: 511,616 radius 6
14:33:00 We found potentially 5 city(s)/6 miles…
14:33:01 It will take a bit… go and twiddle your thumb…
14:33:02 Preset Attack Script, change to suit your needs…
14:33:03 Copy/paste the result list and remember to remove the timestamp
14:33:04 set S attack //change to scout if scouting
14:33:05 set T c:5k //change to s:10k (or however number you want) if scouting
14:33:06 set H !notthishero,butthishero //change to your hero name
14:33:07 ======= VICTIM(s) ============
14:33:08 XXX,YYY : Player (Castle) {Mile}
14:33:25 %S% 513,615 %H% %T% //: brake (ben) {2.24}
14:33:49 %S% 506,613 %H% %T% //: brake (tuscbra) {5.83}
14:34:06 %S% 506,619 %H% %T% //: bokbok (boktusc) {5.83}
14:34:14 ======= END: 3 VICTIM(s) ====
14:34:20 ======= SENDING SCOUT(s) =====
14:34:23 Scouting: 513,615 – brake (ben)
14:34:24 Checking for available troops…
14:34:24 scout – starting march to (513,615) with scout:10000, arrival @:14:34:46 in 00m:22
14:34:29 Scouting: 506,613 – brake (tuscbra)
14:34:30 Checking for available troops…
14:34:30 scout – starting march to (506,613) with scout:10000, arrival @:14:35:28 in 00m:58
14:34:35 Scouting: 506,619 – bokbok (boktusc)
14:34:36 Checking for available troops…
14:34:36 scout – starting march to (506,619) with scout:10000, arrival @:14:35:34 in 00m:58
14:34:39 ======= DONE SCOUTed =========
14:34:40 Script stopped, action ‘end’ cancelled

Source: sgkdnay

Evony Hookups

Tips, Tricks, Guides, and Strategies to make you stronger while playing Evony…

NEAT Bot Scripts

Noob or Inactive Spam Script for NEAT Bot – by EHU

This Noob/Inactive Spam Script is crude, but definitely does the trick! You can edit it to suit many needs.. 🙂

Noob or Inactive Spam Script for NEAT Bot – by EHU:

Hero Finder Script for NEAT Bot – by Sericom

Find bad ass new heroes from the inns with style using this Age 1 NEAT Bot Hero Finder script by Sericom

Version 1 – Hero Finder Script for NEAT Bot – by Sericom:

Version 2 – Hero Finder Script for NEAT Bot – by Sericom:

Note: This will currently only work with level 1 Inns.

Find Player in Peace Mode within Radius Script for NEAT Bot – by sgkdnay

Find Players in Peace Mode to attack with ease using this NEAT Bot script by sgkdnay

Find Player in Peace Mode within Radius Script for NEAT Bot – by sgkdnay:

Find Player in Peace Mode within Radius Script for NEAT Bot – by sgkdnay
OUTPUT:

This Noob/Inactive Spam Script is crude, but definitely does the trick! You can edit it to suit many needs.. 🙂

Noob or Inactive Spam Script for NEAT Bot – by EHU:

Find bad ass new heroes from the inns with style using this Age 1 NEAT Bot Hero Finder script by Sericom

Version 1 – Hero Finder Script for NEAT Bot – by Sericom:

Version 2 – Hero Finder Script for NEAT Bot – by Sericom:

Note: This will currently only work with level 1 Inns.

Find Players in Peace Mode to attack with ease using this NEAT Bot script by sgkdnay

Find Player in Peace Mode within Radius Script for NEAT Bot – by sgkdnay:

Find Player in Peace Mode within Radius Script for NEAT Bot – by sgkdnay OUTPUT:

Find Player in Peace Mode within Radius Script for NEAT Bot – by sgkdnay
OUTPUT: